How to use edge banding

Wood Edge: Mainly applicable to the wood furniture plate Bing paste and decoration, in operation can only be done by hand-pasted method. Glued wood edge Adhesive for water-soluble glue or strong glue, paste as long as the edge of the plate on the line, there is no specific requirements on the ambient temperature. Because the wood is hygroscopic material, its water content will be affected by the external temperature, humidity and change, therefore, choose which kind of glue should be based on seasonal changes and water diffusion and infiltration requirements. Only by mastering the choice of the type of glue mixture, can the sealing strip and plate through the wood fiber infiltration to make the glue mixture to form a good "rivet fixed effect." In addition, wood-trimmed furniture must be painted on the surface of the brush treatment.
　　PVC Edge Banding: mainly applicable to micro-stand plate, MDF, Blockboard, plywood Bing edge, solid wood edge can also. Practical use of manual pasting and mechanical pasting method to complete, but the main mechanical paste, can improve work efficiency. Adhesive for gluing PVC edge strips is universal glue and hot melt adhesive, white latex, but it is good for hot melt adhesive. In the paste through the mechanical locking, physical gravity, chemical bond effect of the PVC edge banding firmly attached to the surface of the board, so paste on the substrate Bing the flatness requirements are very high, the general tolerance must not be greater than 0. 1mm, the temperature of the plate and the ambient temperature of the paste work should be in 18 ℃ advisable. Hot melts of the curing time is generally 30 minutes, but the choice of low-temperature adhesive or high-temperature adhesive according to the thickness of the edge to be determined.
　　Melamine Edge Banding: The scope of application and PVC edge banding is basically similar. However, the best sealing edge for the fireproof board. The operation of manual, mechanical sealing edge is all right; universal glue, white latex and other adhesives are not high requirements, the use of flat stickers, rolling paste can be used in the market any choice of adhesives; The hot melt adhesive is the glue to control the temperature of 120℃~160℃, the pressure at 4-6/2, curing time is 20-50 seconds, The ambient temperature is 15 ℃ when pasting indoors. In view of melamine sealing strip to hot melts, adhesive permeability than PVC, and plate paste to reduce the amount of adhesive coating, generally controlled in 6-8g/linear meter range. Mechanical sealing edge, the visual effect for the glue coating uniform, clear screen; mechanical glue running speed of $number m/min, its edge paste running speed is a variety of edge sealing edge when the fastest, so as not only to ensure the quality of paste, but also to improve work efficiency.